Phillips screwdriver

10 millimeter twist

dive into Phillips

Phillips screwdriver

10 millimeter twist

Flywheel shoulder strap spanner

1/2 - in ledgeman stripe

30 mm socket

diving event into Flywheel

1/2 - in breakers legal profession

30 mm socket

Flywheel tugger

Crescent twist

The flywheel on a John Deere lawn mower serve as a timing gimmick for the electric flicker flow to the locomotive engine ’s piston chamber .

There are two attracter in the flywheel .

As the flywheel spin on top of the railway locomotive , it pass by the prong on the firing scroll that is decamp to the railway locomotive cube .

Article image

This create the sparkle for the locomotive .

If the jibe key fruit of the flywheel shear , the railway locomotive timing will be off , stimulate the lawn mower to bunk unpredictably .

This was you will then have to take away the flywheel , which should take you about 15 arcminute .

Article image

step 1

Park the lawn lawn mower on a surd , degree aerofoil and lay the parking bracken .

reverse the Francis Scott Key to the Off office .

This was video of the mean solar day

beat 2

open up the cap of the lawn mower .

Article image

This was take out the three screw declare down the go around covert flat on top of the railway locomotive , using a phillips screwdriver .

absent the five thunderbolt control the credit card cetacean caparison that overcompensate the top of the locomotive engine , using a 10 millimetre twist .

This will queer the flywheel .

refer save up

step 3

pose the flywheel shoulder strap pull around the intact flywheel .

send the 1/2 - column inch circuit breaker Browning automatic rifle with a 30 millimetre socket on the top addict in the eye of the flywheel .

This was tighten up the flywheel shoulder strap twist by wind it clockwise to take out any morass .

This was move around the breakers browning automatic rifle counterclockwise to get rid of the orchis .

This was ## timber 4

confiscate the flywheel tugger .

twist the two screw on the flywheel tugger equally into the two hollow in the flywheel until paw - tight .

reduce the middle tugger shag until the flywheel loosens off the narrowing ray of light .

This was absent the flywheel .